®1ilD
m@
b=====================================~ ~==================================~
.&
Safety warnings
You must read these warnings, Ignoring these
warnings may put you or your loved ones at risk
of fatal injuries,
.&
Burn risk!
• Do not touch the discharge hose or the water disc-
harged during the discharging process as the appli-
ance may reach high temperatures when running.
• Open the door of the machine all the way after the
drying process. Do not touch the door glass. Burn
hazard may occur due to high temperature.
it.
NO WATER
Check water
supply.
Water cut-off or low mains water pressure.
- Water tap may be closed. Check.
- Mains water may be cut-off. Check.
- If
so, switch the programme knob to
CANCEL position. You can select a
and run your machine after the
mains water is supplied.
- Mains water pressure may be low.
Check.
- Water inlet hose may be twisted.
Check.
- Water inlet hose may be clogged.
- Clean water inlet hose and
valve
inlet
filters.
(*)
If
the problem persists, unplug your
machine, turn off your
tap
and contact the
nearest authorised service company.
(*)
See page 98.
To Next Page
Loading...