'" wash
&
dry
EC~nME--------------- 9
kg. okg.
6
Synthetics Wash
&
Dry
2:40
MEMORY
"
•
I
• You can activate the programme you want to select
by
touching
the
-7
symbol button.
• After the the selection has been activated, the electronic disp-
lay will return to the main screen of the programme you have
selected automatically. You can select other features you want to
select on this screen and run the machine by pressing the Start!
Pause button.
Transport screws should then be
removed by pulling them out. The
removed transport safety screws
should be stored to be used again in
case the machine needs to be trans-
ported again, e.g.
if
moving house.
NOTE:You must remove the trans-
portation screws from your machine
before first use. Faults occurring in
machines operated with transport
screws stiDfitted shall be out of the
scope of the warranty.
Place the plastic transportation
screw caps found in the accessory
bag in the gaps left by the transpor-
tation screws.
To Next Page
Loading...