EN - 18
6. Pre-Wash(*)
button 4 Pre-
wash
drawer.
button when the symbol is displayed.
7. Extra Rinse(*)
button 4
to the end of the selected wash programme
button when the symbol is displayed.
8. Rapid Wash(*)
wash
programme.
wash button when the
NOTE: If you put less than
half load, the
(*) Model Dependant
9. Start/Pause Button
Start-Pause
To start the selected programme, press the
Start/Pause button.
10. Child Lock
The Child Lock function allows you to lock
the buttons so that the wash cycle you have
chosen cannot be changed unintentionally.
To activate child lock, press and hold
button 3 and 4 simultaneously for at least
3 seconds. ‘’CL’’ will flash on the electronic
display for 2 seconds when the child lock is
activated.
If any button is pressed or selected
programme is changed by the programme
dial while the child lock is active, the “CL”
symbol will flash on the electronic display
for 2 seconds.
To Next Page
Loading...
