Sharp ES-HFB8143W3-DE - Page 155

EN -71-
CHAPTER -9: TROUBLESHOOTING
Excessivefoamis
formedinthedetergent
drawer.
Excessiveamount
ofdetergentused.
PressonStart/Pause
button.Toeliminatefoam
formation,mixaspoon
of softener with half
litres of water, and pour
themixtureinthedeter-
gentdrawer.After5-10
minutes,PressonStart/
Pausebuttonagain.In
yournextwashingopera-
tion,Adjustthedetergent
doseaccordingly.
Use detergents pro-
ducedonlyforautomat-
icwashingmachinesin
yourmachine.
Wrongdetergentused.
Thecontaminationde-
gree of your laundries
doesnotmatchthe
programmeyouhave
chosen.
Selecttheprogramme
appropriate for the
contaminationdegree
ofyourlaundries.(See
programmetable)
Adjusttheamountof
detergent based on the
amountandcontami-
nation degree of your
laundries.
Amountofdetergent
usedinsufcient.
Laundriesinex-
cessofmaximum
capacity put in your
machine.
Loadyourmachinewith
laundries,amountof
whichwillnotexceed
maximumlaundryca-
pacity.
Unsatisfactory washing
result.
FAULT
POSSIBLE
CAUSE
TROUBLE-
SHOOTING