HT-SL72_77_Front ZB271EN.fm
2012March6
HT-SL72 HT-SL77
● This product is recommended for flat panel TV (LED, LCD and plasma).
HT-SL77:
● For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.
● This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore
for HDMI connection, your TV’s CEC must be enabled. For detail, refer to the operation manual of the TV.
● For TV without HDMI CEC, headphone or RCA analog connection is available.
● For TV without HDMI, headphone or RCA connection is required.
● This unit supports HDMI which enables Audio Return Channel (ARC).
HT-SL72:
● HDMI connection and input selector are not available.
Recommended Connection:
Model TV Type CEC FUNCTION CONNECTION (TV) CONNECTION METHOD
HT-SL77
HDMI
(with ARC)
MUST BE ENABLED
HDMI IN
(ARC)
Page 11, Method 1
with HDMI MUST BE ENABLED HDMI IN Page 11, Method 2
HT-SL72
&
HT-SL77
HDMI TV without
CEC & ARC or non
HDMI TV
NONE
HEADPHONE OUT Page 12, Method 1
RCA Page 12, Method 2
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP product.
TINSZB271AWZZ
Printed in Malaysia
12C R KI 1
MODEL
HT-SL72 / HT-SL77
SOUND BAR HOME THEATER SYSTEM
ENGLISH
● HT-SL72 SOUND BAR HOME THEATER SYSTEM consisting of TX-SL72 (Amplifier System),
CP-SW72 (Active Subwoofer System) and HT-SL72 (Sound Bar).
● HT-SL77 SOUND BAR HOME THEATER SYSTEM consisting of TX-SL77 (Amplifier System),
CP-SW77 (Active Subwoofer System) and HT-SL77 (Sound Bar).
To Next Page
General