What to do if my Sharp KD-NHB9S6GW3-EN Dryer won't start?
If your Sharp Dryer won't start, ensure it's properly plugged into the socket. Also, check that the loading door is completely closed and that you've set a program and pressed the Start/Pause button. Deactivate the child lock if it's enabled. In case of a power failure, press the Start/Pause key to resume the program.
Why does my Sharp KD-NHB9S6GW3-EN Dryer take so long to dry?
If your Sharp Dryer takes too long to dry, the lint filter's surface may be clogged; wash it with lukewarm water. The heat exchanger might also be clogged, so clean it. Ensure the ventilation grills are open to prevent the room temperature from rising excessively. Clean the humidity sensor if it has limescale. Avoid overloading the dryer, and select a higher spin speed on your washing machine to ensure laundry is sufficiently spun before drying.
What to do if laundry is still damp after using my Sharp KD-NHB9S6GW3-EN Dryer?
If your laundry is damp after drying in your Sharp Dryer, it might be because the program isn't suitable for the load. Check the care labels and select an appropriate program, using time programs if needed. Also, a clogged lint filter or heat exchanger can cause this; wash the filter with lukewarm water and clean the heat exchanger. Avoid overloading the dryer, and ensure your laundry is spun at a higher speed in the washing machine beforehand. Remember that hot laundry may feel more humid.
How to fix the filter cleaning warning symbol on my Sharp KD-NHB9S6GW3-EN Dryer?
If the filter cleaning warning symbol is on in your Sharp Dryer, the lint filter might be unclean. Clean the filter. Also, the filter seat might be clogged by lint; clean the filter seat. If there's a layer obstructing the lint filter's surface, wash the filter with lukewarm water.
How to fix the heat exchanger cleaning warning symbol on my Sharp KD-NHB9S6GW3-EN?
If the heat exchanger cleaning warning symbol is on for your Sharp Dryer, the heat exchanger may be unclean. Clean the heat exchanger.
Why have my clothes shrunk after using my Sharp Dryer?
If your clothes have shrunk, felted, or deteriorated after using your Sharp Dryer, the program used might not be suitable for the type of laundry. Check the care labels on your laundry items and select a suitable program.
What does it mean when the water tank symbol is flashing on my Sharp KD-NHB9S6GW3-EN Dryer?
If the water tank warning symbol is on or flashing on your Sharp Dryer, the water tank may be full. Empty the water tank. If the product is connected directly to the water outlet, check the water discharge hose for bending.
Why are the filter and heat exchanger cleaning symbols flashing on my Sharp KD-NHB9S6GW3-EN Dryer?
If the filter and heat exchanger cleaning warning symbols are flashing on your Sharp Dryer, the filter seat might be clogged by lint. Clean the filter seat. Also, there might be a layer obstructing the surface of the lint filter, so wash it with lukewarm water. The heat exchanger could also be clogged; clean it.
Why is my Sharp KD-NHB9S6GW3-EN Dryer leaking water from the loading door?
To resolve water leaking from the loading door of your Sharp Dryer, clean the inner surfaces of the loading door and the surfaces of the gasket of the loading door to remove any accumulated lint.
What to do if the loading door of my Sharp Dryer opens by itself?
If your Sharp Dryer's loading door opens on its own, it might not be closed properly. Push the loading door until you hear the closing sound.
To Next Page
General