Sharp LC 19SK25U - AV Mode Settings

43
LC-19SK25U/U-W
LC-19SB25U/U-W
LC-19SB15U
LC-19D45U
(5) R/C BUTTON
(6) PANEL BUTTON
(7) MENU BUTTON
(8) ON SCREEN DISPLAY
Selection
Default
Explanation
Limit in Setting
Exception
Remarks
Selection between
"
Respond
"
and
"
No respond
"
(loop provide)
Respond
Keys acceptable by remote control are limited or reception of keys can be prohibited.
In
"
No respond
"
setting, all the keys (including the power key) are not accepted.
•
Adjustment process, factory setting, inspection process and hotel only keys are valid irrespective of setting.
•
All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
•
All the keys can be used also in the initial EZ-Setup after power-ON irrespective of setting.
Selection
Default
Explanation
Limit in Setting
Exception
Remarks
Selection between
"
Respond
"
and
"
No respond
"
(loop provide)
Respond
All the operations by keys (except the power key) of the unit can be invalidated.
•
Inspection mode and hotel menu mode can be started irrespective of setting.
•
All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
•
In U.S.A model, all the keys can be used also in the initial EZ-Setup after power-ON irrespective of set-
ting.
Selection
Default
Explanation
Limit in Setting
Exception
Remarks
Selection between
"
Respond
"
and
"
No respond
"
(loop provide)
Respond
In
"
No respond
"
setting, the menu operation by the menu key of the remote control and the menu key of
the unit are invalidated.
•
Inspection mode and hotel menu mode can be started irrespective of setting.
•
All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
•
All the keys can be used also in the initial EZ-Setup after power-ON irrespective of setting.
Selection
Default
Explanation
Limit in Setting
Others
Exception
Remarks
Selection between
"
Yes
"
,
"
NO
"
(loop provide)
Yes
The following OSD displays are made ineffective.
Displays of menu group, channel call, sound volume bar and direct key call
•
ON-timer (Wake-up timer) is cleared and set to
"
OFF
"
.
•
Set time of the OFF-timer (SLEEP TIMER) is cleared.
•
Setting of the no-signal power-OFF (AUTO POWER OFF) is cleared to
"
OFF
"
.
•
Setting of the no-operation power-OFF is cleared to
"
OFF
"
.
•
Keys falling under any of the following items become invalid.
1
Appearance of screen changes and the sound changes.
2
Personal functions which are hard to restore.
Screen display, menu, OFF-timer, ON-timer, AV MODE, screen size switching, clock setting, treble
emphasis, AUDIO ONLY, sound changeover, LANGUAGE, CLOSED CAPTION
•
Simple input switching is generated. Those which are restored soon after leaving as they are and may
be requested for change by customer are not prohibited.
Brightness sensor (BACKLIGHT) .
•
Such a caution which is displayed independently is displayed as it is.
Non-responding signal caution.
•
When CC has already been ON, CLOSED CAPTION is displayed.