demodulator, and Sound/Video processor into a single device. This allows the overall BOM to be reduced 
significantly making the MSD9WB7PX-2 a very competitive multi-media DTV solution. For ATV users, the 
MSD9WB7PX-2 provides multi-standard analog TV support with adaptive 3D video decoding and VBI data 
extraction. The build-in audio decoder is capable of decoding FM, AM, NICAM, A2, BTSC and EIA-J sound 
standards. The MSD9WB7PX-2 supplies all the necessary A/V inputs and outputs to complete a receiver 
design including a multi-port HDMI receiver and component video ADC. All input selection multiplexed for 
video and audio are integrated, including full SCART support with CVBS output. The equipped MStar 
MACE-5 color engine is the latest masterpiece from MStar famous color engine series providing excellent 
video and picture quality in Full-HD and large-scale displaying system. To meet the increasingly popular 
energy legislative requirements without the use of additional hardware, the MSD9WB7PX-2 has an ultra low 
power standby mode during which an embedded MCU can act upon standby events and wake up the 
system as required.
8.2.General Features
MSD9WB9PX-2, an SOC solution that supports channel decoding, MPEG decoding, and media-centre 
functionality enabled by a high performance AV CODEC and CPU Key features include,
 Digital and Analog DVB Front-End Demodulator
 A Multi-Standard A/V Format Decoder
 The MACE-5 Video Processor
 Home Theater Sound Processor
 Peripheral and Power Management
Transport Stream De-multiplexer
 Supports parallel and serial TS interface, with or without sync signal
 Supports TS input and output for external CI module
 Maximum TS data rate is 104 Mb/sec for serial or 16 MB/sec for parallel
 32 general purpose PID filters and section filters for each transport stream de-multiplexer
 Supports additional audio/video/PCR filters
 Supports TS DMA channel for time-shift
 Supports 3DES/DES and AES encryption/decryption
MPEG-2 Video Decoder
 ISO/IEC 13818-2 MPEG-2 video MP@HL
 Automatic frame rate conversion
 Supports resolution up to HDTV (1080i, 720p) and SDTV
MPEG-4 Video Decoder
 ISO/IEC 14496-2 MPEG-4 ASP video decoding
 Supports resolutions up to HDTV (1080p@30fps)
 Supports DivX1 Home Theater & HD profiles (Optional)
 Supports VC-1Optional, FLV video format decoding