1
2
3
4
1
2
3
48
■
Cable control buttons
When the FUNCTION is set to CBL/SAT, the cable converter connected to
the TV can be operated using 1 to 4.
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9
Press a button (or buttons) that corresponds to the channel that you wish
to watch.
3 FLASHBACK *
Press to switch between the current channel and the channel you were
watching immediately before.
4 CH
r
/
s
Press CH
r
or CH
s
to tune in a higher or lower channel.
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
■
SAT control buttons
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9, • (DOT)
Press a button (or buttons) that corresponds to the channel that you wish
to watch.
3 ENTER,
a
/
b
/
c
/
d
ENTER: Press to activate the selected function.
a
/
b
/
c
/
d
: Press the button to select items on the SAT GUIDE screen
or SAT MENU screen.
NOTE
• CABLE and SAT cannot be selected at the same time.
Other viewing options
To Next Page
Loading...
Need help?
General