Sharp LC 32SH20U - 32" LCD TV - Page 33

Useful adjustment settings
Changing the password
Allows you to change your current password.
Allows you to use a password to protect certain
settings from being accidentally changed.
iMPORTANT:
Three conditions must be met to enable the V-Chip
(:b Password is registered.
© V-CHIP settings have been made.
(:3) "V-CHIP" is set to "ON".
Setting a password
Press MENU and the MENU screen
displays.
Press 4/t_ to select (LOCKS).
Press A/V. The password entering menu
displays.
Select and enter a password (4 digits) using
the number buttons (0-9), then press
ENTER.
LOCKS
[O-9]:SELECT ENTER:SET
EXIT:END
"_" appears instead of the number.
Enter the same password again to confirm,
then press ENTER, the password is now
registered and the LOCKS menu will appear
on the screen.
LOCKS
[O-9]:SELECT ENTER:SET
EXIT:END
Repeat steps 1 to 3 in setting a password.
• The password entering menu displays.
Input the 4-digit password by using 0-9,
then press ENTER.
Press A/V to select "NEW PASSWORD",
then press 4/i_.
LOCK=S
V-CHIP OFF
V-CHIPSET _,
tEl:SELECT I_:ADJUST
Enter a new password using 0-9, then
)ress ENTER.
LOCKS
[O-9]:SELECT ENTER:SET
EXIT:END
Enter the same password again to confirm,
then press ENTER.
LOCKS
[O-9]:SELECT ENTER:SET
EXIT:END
The screen returns to LOCKS menu. Your
new password has been set.
• As a precautionary measure, make a note of your
password and keep it in a familiar place.
• The "V-CHIP SET (D-IV)" wilt only be setectabte when
a new rating system can be downloaded via digital
broadcasting in the U.S.
_= 32