English - 38 -
Installing the Stand
IMPORTANT
Please read the following information carefully before attaching the stand to your new Sharp
Television.
Installing the Stand
• Before fi tting the stand, ensure that the TV is unplugged from its power source.
• Place the Sharp Television (1) on a soft, stable and fl at surface, facing down.
• Place the Stand (3) on the stand mounting pattern on the rear side of the TV.
• Ensure the Stand (3) is placed correctly and that you can see the screw holes on the back of the Sharp
Television.
• Place the Stand Cover (2) on the Stand (3).
• Ensure the Stand Cover (3) is placed correctly and that you can see the screw holes on the back of the
Sharp Television.
• DO NOT insert the screws before placing the plastic molding.
• Insert the screws provided and tighten them gently until the stand is properly fi tted.
1. Sharp Television
2. Stand Cover
3. Stand
A01_[GB]_mb95_4847uk_DVBT_C_S2_DLNA_HBBTV_MMH_39205LED_GOLD19_50249288_basic IB.indd 38A01_[GB]_mb95_4847uk_DVBT_C_S2_DLNA_HBBTV_MMH_39205LED_GOLD19_50249288_basic IB.indd 38 12.09.2013 15:03:2412.09.2013 15:03:24
To Next Page
Loading...
Need help?
General