5
STEP 1. Attach the TV Stand or Wall Mount Bracket
Attach the TV Stand
CAUTION:
● Be sure to disconnect the A/C power cord before removing a base stand or installing Wall-Mount brackets.
● The screen display is very fragile, and must be protected at all times when installing the base stand. Be sure that no hard or sharp
object, or anything that could scratch or damage the screen display, comes into contact with it. DO NOT exert pressure on the front of
the TV at any time because the screen could crack.
Follow the illustrations and instructions below to complete the installation steps:
1. Carefully place your TV facedown on a soft, at surface to prevent damage to the TV or scratching to the screen.
2. Remove the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV.
3. Use the 4 screws in the accessory bag to secure the BASE STAND to the TV.
Screws
M4×20
BASE STAND
Screws
M4×20
BASE STAND
To Next Page
Loading...
Need help?
General