Sharp LC-46E77U - Page 17

LC-46/52E77U
4 – 5
5. Removing of Main PWB Angle, Panel Support Angle, Barrier Sheet and LCD Panel Module Unit.
1. Remove the 1 lock screw and detach the Main PWB Angle.
2. Detach the Barrier Sheet from Panel Support Angle. Remove the 16 lock screws and detach the Panel Support Angle.
3. Remove the 8 lock screws and detach the LCD Panel Module Unit.
3
2
2
Panel Support Angle
LCD Panel Module Unit
Panel Support Angle
1
Main PWB Angle
Barrier Sheet