Sharp LC-50N3100U - STEP 4. Power on the TV

11
STEP 4. Power on the TV
Plug one end of the power cord into the AC INPUT connector on
the back of your TV and the other end into a power outlet.
If your Cable or Satellite provider does not have a SHARP code
available, please contact us at one of the phone numbers on Page 2.
UsingYourCableSet-topBoxorSatelliteReceiver
Remote as a ‘Universal’ Remote
If you prefer to use your Cable Set-top Box or Satellite Receiver
Remote as a ‘Universal Remote’, then visit the Support page of the
SHARP USA website to view a list of the codes.
Press the Power button
on the remote to turn on the TV. A
splash screen that shows the SHARP logo appears. Next, the
First-Time Setup Menu begins by prompting you to choose your
Language, Country, and Time Zone.
Wall Outlet
Power Cord