To Next Page

To Previous Page

Attach the Wall Mount Bracket (not included)

Before you begin the third-party manufacturer instructions, be

sure to do the following things:

1. Place the TV face down on a clean, safe and cushioned surface.

2. Remove the TV stand if you already attached it.

3. Place the spacers (not included) in the corresponding bracket

holes.

CAUTION:

• Whenyouattachthe mount,besuretousethespacers

(provided by the third-party manufacturer) between the TV

and the bracket.

• TopreventinternaldamagetotheTVandensureitis

mountedsecurely,besuretousefixingscrews(not

provided) that are 9.5 - 11.5 mm in length when measured

from the attaching surface of rear cover.

Rear cover of the TV Spacer

Screw

Wall mount bracket

9.5 - 11.5 mm

Wall mount hole pattern

VESA (mm)

200 × 400

Wall mount screw size (mm) M6 × 25

Follow instructions provided with the Wall mount bracket.

To complete the installation, please contact the wall-mount

manufacturer.

The selected screws are 9.5 - 11.5 mm in length when

measured from the attaching surface of the rear cover. The

length of the screws differ depending on the Wall

mount bracket

model.

NOTE: The length of the screws differ depending on the wall

mount bracket model.

Bracket

(not provided)

Spacer

(not provided)

Screw

(not provided)

Sharp LC-50N3100U User Manual

Questions and Answers: