20
LC-55LB481U 55" Full HD LED 1080p Sharp Roku TV
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see What connection should I use? on page 15.
You can connect a DVD or Blu-ray player using:
•HDMI® (best)
•AV (good)
HDMI
®
(best)
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI® cable (not provided) to an HDMI jack on the side or back of your TV and to the HDMI OUT jack on the
DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 On the Home screen, press or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
Note
An HDMI® cable carries both audio and video. You do not need to use any
audio cables.
Side of TV
HDMI® cable
DVD or Blu-ray player
HDMI® cable
connector
HDMI® jack
On your TV
Sharp LC-55LB481U_16-0752_MAN_V2_EN.book Page 20 Friday, November 4, 2016 3:00 PM
To Next Page
Loading...
