29
LC-55LB481U 55" Full HD LED 1080p Sharp Roku TV
Analog audio
When you connect an analog system or sound bar to the AUDIO OUT jack, your TV speakers are muted.
1 Make sure that your TV’s power cord is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the jack on the side of your TV and to the AUDIO IN jacks on the analog
speaker system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
Audio cable
Analog speaker system
Side of TV
Audio cable
connector
jack
On your TV
Sound bar
Sharp LC-55LB481U_16-0752_MAN_V2_EN.book Page 29 Friday, November 4, 2016 3:00 PM
To Next Page
Loading...
