Sharp LC-60G9T - Page 33

LC-60G9T / LC-70G9T
5 – 18
14. SOFT/ ROM VERSION
ERUDECORPNOITIDNOCMETI
Factory setting AC power off to exit the
factory setting.
Go to adjustment mode page [2/33], move cursor at [INDUSTRY INIT]
and press [OK] at Remote control.
ޚFor X model, please select destination either
- AUSTRALIA for COUNTRY of AUSTRALIA
- NEWZEALAND for COUNTRY of NEW ZEALAND
- GENERAL for others ASIA COUNTRIES
Remark: GENERAL setting is for MALAYSIA/ SINGAPORE/
INDONESIA/ SINGAPORE/ VIETNAM/ PHILIPINNE/ THAI
MIDDLE EAST
ޚ For T model, just press [ENTER] at Remote Control and no
selection need to be done.
////////// appear, after that
SUCCESS --------- Destination appear after finished.
If success, background colour is GREEN , if failed, background colour
is RED
The followings are initialised to factory setting
1) User setting
2) Channel data (e.g. broadcast frequencies)
3) Manufacturer’s option settings
4) Password data
1.Main microprocessor
2.Monitor microprocessor
XIANSUBxxx.SMB
3.T-CON ROM
950X/951X
XIAN_LE950X_xxx.USB
XIAN_LE950X_xxx.UVP
XIAN_LE950X_xxx.PCC
G9T
XIAN_G9T_xxx.USB
XIAN_G9T_xxx.UVP
XIAN_G9T_xxx.PCC
LC-60LE950X/951X,LC-60G9T
PRIMEROSE_CMB_601F8(YS2)_2012100330110002_3FAAEBD.ROM
LC-70LE950X/951X,LC-70G9T
PRIMEROSE_CMB_701FC(YS2)_2012100330550004_3B59E6E.ROM