80
Connect method
connect method follow next image
Operation Procedure
Use tool and les in 加密芯片_muji.rar or 加密芯片_Manhattan.rar
1. Connect the Uart debug tool, Disconnect the tool which you used to get log information.
2. Open the MSTV_Tool.exe.
3. Press the button“Show Device ID” to show the Device ID.
4. Connect the Uart debug tool, Disconnect the tool which you used to get log information.
5. Open the MSTV_Tool.exe.
6. Press the button “Show Device ID” to show the Device ID.
7. please send you device ID to us (xinzhaoqiang@cvte.com) ,we will send the key to you.
8. Select View->OpenDebugPort and enter the OpenDebugPort menu, input the key string you
get in step4 at the OpenDebugPort menu and press Run button of the OpenDebugPort
menu. Check and make sure run successfully.
To Next Page
Loading...
Need help?
General