Sharp LC-80LE642U - Page 18

LC-80LE642U
4 – 7
4. Removing of LCD CONTROL Unit, MAIN Unit, POWER/DRIVE Unit.
1. Remove the 2 Connecting Cords , 2 Ferrite Cores , 6 lock screws and detach the LCD CONTROL Unit .
2. Remove the 2 lock screws and detach the Terminal Angle (Side) .
3. Remove the 6 lock screws and detach the MAIN Unit and Terminal Angle (Bottom) .
4. Remove the 6 lock screws and detach the POWER/DRIVE Unit .
5. Remove the 12 lock screws and detach the 2 Stand Angles .
6. Remove the 16 lock screws and detach the 4 VESA Angle Assys .
80" LCD Panel
Module Unit
11
10
1 FFC
2 Ferrite
Core
LCD
Control
Unit
12
3
13
12
POWER/
DRIVE
Unit
Stand Angle
13
Stand
Angle
4
14
15 VESA Angle Assy
14
15 VESA Angle Assy
14
15VESA Angle
Assy
14
15VESA Angle
Assy
8
MAIN Unit
6
Terminal
Angle (Side)
9
Terminal Angle
(Bottom)
5
7
7