What to do if 3D images appear doubled on Sharp LC-80UQ10E?
If images displayed in 3D mode appear doubled while you are wearing the 3D glasses, ensure that the power of the 3D glasses is turned on. Press the power button for at least 2 seconds to turn on the 3D glasses.
How to fix 3D images not displaying on Sharp LC-80UQ10E?
If 3D images are not displayed on your Sharp Lcd colour television, here are a few things to check: * Verify if “3D auto change” is set to “Off”. If so, press the 3D button to switch to 3D mode. * If “3D auto change” is set to “Mode1” or “Mode2”, confirm the display format of the content. Some 3D signals may not be automatically recognized; press the 3D button to select the correct format. * Ensure the 3D glasses are powered on by pressing the power button for at least 2 seconds. * Make sure the 3D glasses are not in 2D mode. Press the power button briefly (less than 2 seconds) to switch to 3D mode. * Check for obstructions between the 3D glasses and the TV, ensuring nothing covers the receiver on the glasses. The glasses need a clear signal from the TV’s 3D emitter.
General| Brand | Sharp |
|---|---|
| Model | LC-80UQ10E |
| Category | Lcd colour television |
| Language | English |
To Next Page
