EasyManua.ls Logo

Sharp Aquos LC-60LE640X - User Manual

Sharp Aquos LC-60LE640X
88 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LC-60LE640X
LCD COLOUR TELEVISION
OPERATION MANUAL
LC60LE640X_EN_book.indb 1LC60LE640X_EN_book.indb 1 9/10/2012 2:48:12 PM9/10/2012 2:48:12 PM

Table of Contents

Questions and Answers

  • J
    Jennifer ManningAug 10, 2025
    What to do if 3D images are not displayed on my Sharp Lcd colour television?
    • D
      Diane McintoshAug 10, 2025
      If 3D images are not displaying on your Sharp Lcd colour television, there are several things to check: * First, verify that “3D auto change” is not set to “Off”. If it is, press the 3D button to switch to 3D mode. * If “3D auto change” is set to “Mode 1” or “Mode 2”, the TV might not automatically recognize the 3D signal. In this case, press the 3D button to manually select the correct display format. * Ensure that the 3D glasses are powered on. * Make sure the 3D glasses are not set to 2D mode. * Confirm that there are no obstructions between the 3D glasses and the TV, and that nothing is blocking the infrared receiver on the glasses.
  • E
    Eric GibsonAug 17, 2025
    Why do my Sharp Lcd colour television 3D glasses turn off automatically?
    • J
      Jennifer OneillAug 18, 2025
      Your 3D glasses might be turning off automatically for these reasons: * An obstacle may be present between the 3D glasses and the TV, or something might be covering the infrared receiver on the 3D glasses. * The 3D glasses will automatically power down after three minutes if they don't receive a signal from the TV.
  • J
    Jessica HaneyAug 25, 2025
    What to do if pressing the power button on Sharp Aquos LC-60LE640X Lcd colour television 3D glasses does not cause the LED light to light?
    • C
      Christopher Chavez Jr.Aug 25, 2025
      If the LED light doesn't illuminate when you press the power button on your 3D glasses for more than one second, it means the battery is likely exhausted. You should replace the battery.
  • S
    stacyfranklinSep 1, 2025
    What to do if sliding the switch to 3D on Sharp Lcd colour television 3D glasses does not cause the LED light to light?
    • R
      robertsnancySep 2, 2025
      If sliding the switch to 3D to turn on the power does not cause the LED light to light, it indicates that the battery is exhausted. You should recharge the battery or supply power to the 3D glasses via the TV using the USB cable (supplied accessory).

Summary

Preparation

Protection Against Overturning

Measures to prevent the TV from tipping over for user safety.

Fixing the TV to the Table

Instructions for securely placing and attaching the TV to a table.

Attaching the Stand Unit

Step-by-step guide for assembling and attaching the TV stand.

Connecting the TV

Instructions for connecting the antenna and external devices to the TV.

Part Names and Functions

Remote Control Unit Overview

Detailed explanation of each button on the remote control and its function.

Quick Guide

Initial TV Setup and Signal Check

Guide for initial setup, auto installation, and checking DTV signal strength.

Watching TV

Daily TV Operations

Basic daily tasks like turning the TV on/off and changing channels.

DTV Viewing, Channel List, and Input Selection

Selecting Programmes Using EPG

Step-by-step guide to find and tune to programmes using the EPG.

Timer Setup and Cancellation

How to set and cancel programme timers using EPG or manual settings.

Connecting External Devices

Video Connection Types

Detailed instructions for connecting various video sources like HDMI and DVI.

Audio Connection Methods

How to connect audio systems using digital and analogue inputs.

AQUOS LINK

Controlling HDMI Devices with AQUOS LINK

Explanation of AQUOS LINK for interactive control of connected HDMI devices.

AQUOS LINK Connection Setup

Operating Connected AQUOS LINK Devices

Procedures for controlling connected HDMI devices via AQUOS LINK.

Basic Adjustment

Picture Settings and Modes

How to adjust picture quality using modes, brightness, contrast, etc.

Advanced Picture and Noise Reduction Settings

Audio Settings and Volume Management

How to adjust volume, treble, bass, and balance for sound quality.

Power Saving Features

Channel Management and Settings

How to manage channels, including auto installation and manual tuning.

Network Function

Network Connection Setup

Instructions for connecting the TV to a network via wired or wireless methods.

Wireless Network Installation

Detailed steps for setting up a wireless network connection using a USB adapter.

Using AQUOS.NET for Online Content

Other Useful Features

Using USB Devices for Time Shift and Media

Overview of functions available via USB, including time shift and media playback.

USB Device Usage, Registration, and Checking

USB Device Removal and Time Shift+ Operation

Time Shift Recording and Timer Settings

Time Shift Playback and Memory Management

USB Device Management for Time Shift

Media Playback via USB and Home Network

Video Mode Playback

Connecting a PC

PC Connection Methods

How to connect a PC to the TV using HDMI or analogue connections.

Adjusting PC Image Display

PC Control via RS-232 C or IP Connection

Enjoying 3 D Image Viewing

Viewing 3 D Images and Signal Detection

Procedures for viewing 3D content and handling auto-detection of signals.

Converting 2 D to 3 D and Managing 3 D Modes

3 D Picture Adjustment Options

Troubleshooting 3 D Images and Glasses

Solutions for common problems when viewing 3D images or using 3D glasses.

Appendix

General and Digital Broadcasting Troubleshooting

Solutions for common TV operational problems and digital signal issues.

Resetting TV and Software Updates via DVB-T

Information Access and Software Updates via USB;Network

Wall Mounting and Safety Guidelines

Guidelines and warnings for safely mounting the TV on a wall.

Clearing the TV Password

Sharp Aquos LC-60LE640X Specifications

General IconGeneral
BrandSharp
ModelAquos LC-60LE640X
CategoryLcd colour television
LanguageEnglish

Related product manuals