Sharp LC65N7004U User Manual

11
STEP 6. Establish a network connection
1. Press the
[ ]
button on the remote control, press
[
˅
]
button to select
Settings
and then press
[
OK
]
to enter the Settings menu
.
2. Select
Network
→
NetworkConguration
.
TV JACK
Modem Cabl
eL
AN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
Establish a wired network connection
Automatically obtain an IP address
1. Select
Wired LAN
. The TV will automatically obtain an IP address and connect to the network.
NOTE: The default option of IP Settings Mode is DHCP.
2. If the connection fails then "
Disconnected
" will display for the Ethernet status. Retry or enter the
IP Settings
, select
Manual
to input
the information again.
Manually enter the IP Settings
1. Select
Manual
.
2. Enter the IP Address, Netmask, Gateway, DNS Server 1 and DNS Server 2 in the menu. Next, select
Connect
.

Sharp LC65N7004U Specifications

General

Brand	Sharp
Model	LC65N7004U
Category	Smart TV
Language	English