3
Getting started
Step 1. Attach stand or mount
Before you start using your TV, attach your TV stand or mount it on a wall.
CAUTION:
• Disconnect the A/C power cord before installing a stand or wall-mount bracket.
• The LED display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure on the
front of your TV.
Attach the TV stand
To attach the TV stand legs to your TV:
1. Carefully place your TV face down on a clean, soft, flat surface.
2. Insert the TV Base Stand into the bottom slots on your TV.
3. Use the screws provided to secure each leg tightly.
Base Stand
Base Stand
Screws: M5×12
Screws: M5×12
To Next Page
Loading...
Need help?
General