6
LC-26LX430H LC-32LX430H/NX430H
1
2
Confirm the 3 screws supplied with the stand.
Long screws (m3)
(used in step 2)
① Insert the stand into the openings on tne
② Insert and tighten the 3 long screws into the
Preparation (Continued)
• To detach the stand, perform the steps in reverse order.
• Angle adjustment is not available with the LC-26LX430H/
LC-32LX430H/LC-32NX430H.
• Screwdriver is not supplied with this product.
bottom of the TV.
3 holes on the bottom of the stand.
Soft cushion
Long screws
Screwdriver
1
2
Confirm the 4 screws supplied with the stand.
Long screws (m4)
(used in step 2)
① Insert the stand into the openings on tne
② Insert and tighten the 4 long screws into the
bottom of the TV.
4 holes on the bottom of the stand.
Soft cushion
Long screws
Screwdriver
LC26LX430H_pg01-16_EN.indd 6 2011-6-17 11:57:54
To Next Page
Loading...
