Sharp MD-MS200W - Page 23

MD-MS200W/MD-MS200/MD-MS200H
– 23 –
EEPROM Slide Setting Change Chart
EEPROM TEMP Setting Change Chart
EEPROM BASS Setting Change Chart
BASS setting menu
PLAY
• When the STOP key is pressed in the specified mode, the mode changes to the TEST mode stop state.
B A S S
B S 1
SKIP UP SKIP UP
SKIP DOWN
SKIP DOWN
B S 2
B S 3
: measurement value
TEMP setting menu
PLAY
: Normal setting value : Temperature code
• When the STOP key is pressed in the specified mode, the mode changes to the TEST mode stop state.
T E M P T M
Slide setting menu
PLAY
: measurement value
• When the STOP key is pressed in the specified mode, the mode changes to the TEST mode stop state.
S l e d S L G
SKIP UP SKIP UP SKIP UP SKIP UP SKIP UP SKIP UP
SKIP DOWN SKIP DOWN
SKIP DOWN
SKIP DOWN
SKIP DOWN SKIP DOWN
S L 2
S L M
S L V
S K k
S K t
S L m
Control setting menu
PLAY
C 0 2 ~ C 4 8
• When the STOP key is pressed in the specified mode, the mode changes to the TEST mode stop state.
C T R L
C 0 0
SKIP UP SKIP UP SKIP UP
SKIP DOWN SKIP DOWN SKIP DOWN
C 0 1
C 4 9
C 5 0
: measurement value
EEPROM Control Setting Change Chart