Sharp MD-MS701H - Page 25

MD-MS701H/MS702H
– 25 –
: Tracking setting menu
: Tracking system loop filter gain constant setting (normal)  : setting : Tracking system loop filter f-characteristics constant 1 setting (normal)  : setting : Tracking system loop filter f-characteristics constant 2 setting (normal)  : setting : Tracking system filter selection switch setting  : setting : Tracking brake level setting (1 line jump)  : setting
: Tracking brake level setting (10 line jump)  : setting
: Tracking kick level setting (1 line jump)  : setting : Tracking kick level setting (10 line jump)  : setting : Tracking drive pulse width time setting (1 line jump)  : setting : Tracking drive pulse width time setting (10 line jump)  : setting : Tracking slip stop time setting (1 line jump)  : setting
: Tracking slip stop time setting (10 line jump)  : setting : Tracking slip stop time setting (move)  : setting : PWM output offset setting  : setting : COUT generation comparison level setting (PLAY)  : setting COUT generation comparison level setting (REC)  : setting Auto-move waiting time setting  : setting
PLAY
T r a c k
Tracking setting
T G
T F 1
SKIP UP SKIP DOWN
T F 2
SKIP UP SKIP DOWN
T F S
SKIP UP SKIP DOWN
T B o
SKIP UP SKIP DOWN
T B t
SKIP UP SKIP DOWN
T K o
SKIP UP SKIP DOWN
T K t
SKIP UP SKIP DOWN
T D o
SKIP UP SKIP DOWN
T D t
SKIP UP SKIP DOWN
* When the "STOP" button is pressed in specific menu, the TEST MODE STOP state is set. * In the specific state pressing the [DISP] key causes change to "focus setting menu". * In the specific state the setting changes in the range of "00h to FFh" when the [VOL UP/DOWN] key is pressed. (The upper limit varies depending on the items)
S C o
SKIP UP SKIP DOWN
S C t
SKIP UP SKIP DOWN
S C m
SKIP UP SKIP DOWN
D B O
SKIP UP SKIP DOWN
C L p
SKIP UP SKIP DOWN
C L r
SKIP UP SKIP DOWN
W T m
SKIP UP SKIP DOWN
: Slide setting menu
: Slide system loop filter gain constant setting  : setting : Slide system filter specific constant 2 setting  : setting : Slide drive PWM duty limiter setting  : setting : Slide serve output dead zone level setting  : setting : Slide kick pulse level setting (forced shift)  : setting
: Slide kick pulse level setting (for 10 lines jump auxiliary)  : setting
: Slide kick pulse level setting (move)  : setting
PLAY
S l e d
Slide Setting
S L G
S L 2
SKIP UP SKIP DOWN
S L M
SKIP UP SKIP DOWN
S L V
SKIP UP SKIP DOWN
S K k
SKIP UP SKIP DOWN
S K t
SKIP UP SKIP DOWN
S K m
SKIP UP SKIP DOWN
* When the "STOP" button is pressed in specific menu, the TEST MODE STOP state is set. * In the specific state pressing the [DISP] key causes change to "focus setting menu". * In the specific state the setting changes in the range of "00h to FFh" when the [VOL UP/DOWN] key is pressed. (The upper limit varies depending on the items)
: BASS setting menu
: BASS1 characteristics setting  : setting : BASS2 characteristics setting  : setting : BASS3 characteristics setting  : setting
PLAY
B a s s
BASS setting
B S 1
B S 2
SKIP UP SKIP DOWN
B S 3
SKIP UP SKIP DOWN
* When the "STOP" button is pressed in specific menu, the TEST MODE STOP state is set. * In the specific state pressing the [DISP] key causes change to "focus setting menu". * In the specific state the setting changes in the range of "00h to FFh" when the [VOL UP/DOWN] key is pressed. (The upper limit varies depending on the items)