Sharp MD-MT15

CONVENIENT RECORDING FUNCTION
1 Creating marks while making a
Tic recording (Timed auto mark
function)
Marks can be created at a fixed interval
(every 5 minutes is the default setting) 50
that he beginning of any track can be found.
‘The interval at which marks re created can
be changed by the user.
While in the recording stand-by mode or
While recording, press the EDIT button.
‘© Each time the button is pressed, the set-
ting will change as follows:
3min MARK
A Serene):
MARK OFF
(ees
iGmin MARK
] Rnaiecrates
‘very 10 minutes.)
Smin MARK
‘(Amar is created
‘every 5 minutes.)
© The time between marks may vary
slightly when compared withthe actual
recording time,
15
About the timed auto mark:
‘Whenever a recording begins, a track num-
ber will be created automatically.
(© — "Track number whichis created
‘when a silence lasts for 3 seconds or
more during synchro recording.
@ === : Track number which s created
by the timed auto mark function.
‘Example when the setting is for "5 min-
utes":
‘When making a mic synchro recording
Ta silence lasts for 3 seconds or
| more, aimed auto mark wil be |
‘created 5 minutes after the previ-
‘ously created track number.
‘When
making
a
mic
manual
recording
‘When the setting is changed to 10)
minutes while recording, aimed auto |
| mark wil be created 10 minutes ater |
| ne change is made.
1m Recording tracks a8 asingle track
You can record several pieces of music as
a single track, disable the auto marker func-
tion.
1 Press the EDIT bution while the record-
ing is paused.
‘@ When making digital recordings using a
CO
player
or
an
MD
player,
track
num-
bers wil be created automaticaly re-
‘gardiess of the setting of the auto marker
function.
Making
a
track
number
automati-
cally:
Press
the
EDIT
button
while
the
recording
‘is paused
(© “AUTO MARIC will be displayed.
1 To start recording from the middle
‘of an existing track
You can erase a portion of a track that has
been
already
recorded
and
make
anew
recording,
Caution:
© Allof the tracks that follow the newly re-
‘corded track will be erased.
1 during playback, press the mut button
atthe
point
where
you
want
to
begin
re-
recording.
2 Press the REC button
{© To cancel the operation, press the
LOFF button
3 Press the ENTERISYNC button
(Al of the tracks and track names
be erased, following the point where
the playback is paused,
Numbor ofthe track
to be rocorded nxt
Press tho mu button
@ Recording wil start
Note:
(©
When
there
isa
track
that
you
don't
want
tocrase after the point on the disc where
Yyou want to make a new recording, use
the move function to move the track and
then make your recording after that
point.
(Gee
“EDITING”,
page
26.)
16