Sharp MD-MT80H - Inserting a Minidisc

ENGLISH
00/12/27 E_80seeg_2.fm
E-6
Preparation
-Inserting a MiniDisc-
Inserting a MiniDisc
Notes:
z
Do not place the MiniDisc under the holder.
z
If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resis-
tance is felt, remove the MiniDisc and reload it.
z
The lid cannot be opened if "TOC" is displayed refer to
the instruction on page 10.
1
Slide the OPEN lever to release the compart-
ment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.