EasyManuals Logo

Sharp MD-R2 User Manual

Sharp MD-R2
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
(Continued)
To record for a long time in the monaural
mode (monaural long-play mode)
When a recording is made in the monaural long-play mode, it
can be twice as long as the recording time available for a stereo
recording. The monaural long-play mode is very useful for record-
ing songs that were originally recorded in monaural, or for record-
ing talk programs.
Press the REC MODE button on the remote control.
Each time the button is pressed, the display will switch be-
tween the stereo mode and the monaural long-play mode.
This mode cannot be changed while recording.
The recording mode will not change back until you change it
manually. After you have made a recording in the monaural
long-play mode, it is recommended that you return the unit
to the stereo mode so that you won’t forget to do so later.
To re-record
When you want to re-record, you can erase a track that is already
recorded, starting from any point in the old track, to begin a new
recording.
Be aware that when you do this, all of the tracks and track names
that follow the newly recorded track will be erased.
If there are tracks that you do not want to erase, in the middle
or end of a disc, erase a track that you don’t want before that
track, using the erase function, and then begin a new recording.
If you want to erase all of the tracks and re-record the disc, you
can erase all of the tracks using the all erase function. Then you
simply perform the normal recording operations. (Page 25)
1 During playback, press the
06
button at the point where you
want to begin re-recording.
The unit will pause.
2 Press the RECORD (REC) button.
To cancel the operation, press the button.
3 Press the ENTER button.
The unit will be in the recording pause mode.
4 Press the
06
button.
The unit will start recording.
REC
MODE
MONO LP
TOTAL
“MONO LP” indicator
TOTAL
“MONO LP” will disappear.
RECORD
ENTER
REC
12
4 0dB OVER
4 5 6 7
8 9 10 11 12 13
15 16 17 18
14
(When recording starting from 3 minutes
and 32 seconds into the fourth track)
1
4 5 6 7
8 9 10 11 12 13
15 16 17 18
14
2
TOC
12
4 0dB OVER
1 2 3 4
3
TOC
12
4 0dB OVER
1 2 3 4
4
MD-R2
18

Other manuals for Sharp MD-R2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp MD-R2 and is the answer not in the manual?

Sharp MD-R2 Specifications

General IconGeneral
BrandSharp
ModelMD-R2
CategoryMiniDisc Player
LanguageEnglish

Related product manuals