Sharp MD-R2 User Manual

(Continued)
When an error message is displayed, proceed as follows:
Error messages Meaning Remedy
BLANK MD ● Nothing is recorded.
(Neither music nor a disc name have been
recorded on this MD.)
● Replace the disc with a recorded disc.
Can’t COPY ● You tried to record from a disc which you are
not allowed to copy.
● Replace it with another disc which you can
copy from (regular CD).
Can’t EDIT ● A track cannot be edited. ● Change the stop position of the track and then
try editing it.
Can’t REC ● Recording cannot be performed correctly due to
vibration.
● Move the unit away from the source of vibration.
DEFECT ● Since this disc has scratches on it, the
recording operation was skipped.
● Replace the disc with another recordable disc.
Din UNLOCK ● Incorrect digital signals are input. ● Connect correct digital signals.
● Use the analog input jack.
DISC ERR ● The disc is damaged or there is no TOC on the
disc.
● Reload the disc or replace it.
DISC FULL ● The disc is out of recording space. ● Replace the disc with another recordable disc.
FOCUS ERROR ●The proper focus cannot be obtained. ● Reload the MiniDisc.
MD ERROR ● The unit has determined that it is out of order
by performing a self-diagnosis.
● Ask the store where you purchased this unit,
about repairs.
MECHA ERR* ● There is a mechanical problem and the disc is
not working properly.
● Turn off the power, and press the 7 button.
NAME FULL ● The number of characters for the disc name or
track name exceeds 100.
● Shorten the disc or track name.
NO DISC ● A MiniDisc has not been loaded.
● The MiniDisc data cannot be read.
● Load a MiniDisc.
● Reload the MiniDisc.
NOT AUDIO ● The data recorded on this disc is not audio data. ● Select another track.
● Replace the MiniDisc.
PLAYBACK MD ●You tried to record on a playback-only disc.
● The data of disc names and track names are
not able to move from playback-only discs.
● Replace it with a recordable MiniDisc.
● Edit only the sound.
PROTECTED ● The MiniDisc is write protected. ● Move the write protection tab back to its original
position.
TEMP OVER ● The temperature is too high. ● Turn off the power, and wait for a while.
TOC ERR* ● The disc has a large amount of damage.
● TOC information cannot be read.
● The MD does not meet the specifications for
MDs.
● Replace the disc with another disc.
TOC FULL* ● There is no space left for recording character
information (track names, disc names, etc.)
● Replace it with another recordable disc.
TOC W ERROR ● The unit has determined that it is abnormal by
performing a self-diagnosis.
● Ask the store where you purchased this unit,
about repairs.
U TOC ERR* ● The TOC information on this disc does not
meet the MD specifications or it cannot be read.
● Replace it with another disc.
● Erase all the data, and try recording.
U TOC W ERR ● The TOC information could not be created
properly due to a mechanical shock or to
scratches on the disc.
● Turn off the power, and try to write the TOC
again. (Remove any source of shock or vibration
while writing.)
? DISC ● The data contains an error. ● Replace the disc with another disc.
0 0:00 ● Music is not being recorded. ● Replace the disc with a recorded disc.
*: Number or symbol
MD-R2
37

Sharp MD-R2 Specifications

General

Brand	Sharp
Model	MD-R2
Category	MiniDisc Player
Language	English