Sharp MD-R3

(Continued)
■ To change disc names and track names
To change disc names:
1 During playback, press the MD ■ button.
2 Press the NAME/TOC EDIT button.
3 Within 5 seconds, press the ENTER button.
● The unit will enter the character input mode.
● To cancel this operation, press the MD ■ button.
Now you can erase or add characters. (Page 35)
To change track names:
1 While in the stop mode, select the track name you want to
change, using the jog dial.
2 Press the NAME/TOC EDIT button.
3 Within 5 seconds, press the ENTER button.
● The unit will enter the character input mode.
● To cancel this operation, press the MD ■ button.
Now you can erase or add characters. (Page 35)
NAME/TOC EDIT
ENTER
TRACK
4 5 6 7
8 9 10 11 12 13
15
16 17 18
14
1
2
3
DISC
TOTAL
1 2 3 4 5 6 7
8 9 10 11 12 13
15 16 17 18
14
1
2
3
MD-R3
34