Sharp MD-SR50H

1615
Useful Features
Advanced Recording
1
3
5
1 Press the REC button.
2 Begin playback on the stereo system con-
nected to this unit.
3 Press the REC LEVEL (
5 5
5 5
5 or
4 4
4 4
4 ) but-
ton to adjust the recording level
(analogue connection only).
4 Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
● Select the starting point for your recording and
press the PAUSE button.
5 Press the ENTER/SYNC button.
6 Begin playback on the stereo system.
Recording will begin automatically.
Playback sound-actuated recording
(Synchronized recording)
Recording automatically starts or pauses by detect-
ing sound from the stereo system (Synchronized
recording).
To interrupt recording:
● When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, the recording will be resumed.
● If a silence lasts for 3 seconds or more, the recording
will be paused (Pause function does not work for
approximately 10 seconds after a recording starts).
● When the unit receives sound again, recording automatically starts.
To stop recording:
Press the • ■/:OFF button.
To write recorded contents on the MiniDisc
Press the • ■/:OFF button whilst in the stop mode.