Sharp MD-SR50H - Editing a Recorded Minidisc

3635
Editing a recorded MiniDisc
Advanced features
1 Start playing the track to be erased, and
press the
06 06
06 06
06 button.
2 Press the EDIT button to select “ERASE”.
3 Press the ENTER/SYNC button.
● To cancel the operation, press the • ■/:OFF button.
4 Press the ENTER/SYNC button again.
● The track will be erased.
5 To erase other tracks, repeat steps 1 - 4.
1 Whilst in the stop mode, press the EDIT
button to select “ALL ERASE”.
2 Press the ENTER/SYNC button.
● To cancel the operation, press the • ■/:OFF button.
3 Press the ENTER/SYNC button again.
● All of the tracks will be erased.
Caution:
Once a track has been erased, it can not be recovered.
Check the track number before erasing it.
To erase tracks one at a time To erase all of the tracks at once