■ Recording tracks as a
single track
You can record several pieces of music as
a single track, disable the auto marker
function.
1 Press the EDIT/A. MARK/TIME MARK
button while the recording is paused.
2 Press the
06
button.
● Recording will start.
Note:
● When making digital recordings using a
CD player or an MD player, track num-
bers will be created automatically
regardless of the setting of the auto
marker function.
Making a track number
automatically:
Press the EDIT/A.MARK/TIME MARK but-
ton while the recording is paused.
● “AUTO MARK” will be displayed.
■ To start recording from the
middle of an existing track
You can erase a portion of a track that has
been already recorded and make a new
recording.
Warning:
● All of the tracks that follow the newly
recorded track will be erased.
1 During playback, press the
06
button
at the point where you want to begin
re-recording.
2 Press the REC button.
● To cancel the operation, press the
■/:OFF button.
3 Press the ENTER/F.PLAY/SYNCHRO
button.
● All of the tracks and track names will be
erased, following the point where the
playback is paused.
4 Press the
06
button.
● Recording will start.
Note:
● When there is a track that you don’t
want to erase after the point on the disc
where you want to make a new record-
ing, use the move function to move the
track and then make your recording
after that point.
(The display will be blanked
out immediately.)
2
3
Number of the track
to be recorded next
MODE/INS
DISPLAY
16
MD-MS702
To Next Page
Loading...
