(1) Analog recording
Connect the unit to equipment that has a
line output jack, using the cable included
with this unit.
● Main equipment: CD player, MD player,
radio cassette player, etc.
● Cable required: Connecting cable in-
cluded with this unit
(2) Digital recording
Connect the unit to equipment that has an
optical output jack using an optical digital
cable (available optionally). Using an opti-
cal signal to transfer the music to a Mini-
Disc allows very high quality recording.
● Main equipment: DSS tuner, CD
player, MD player, etc.
● Cable required: Optical digital cable
(AD-M1DC or AD-M2DC, available op-
tionally)
BEFORE RECORDING
DIGITAL OUT
OPTICAL OUT
OPTICAL/
LINE IN
Digital cable
(AD-M2DC, available
optionally)
To the optical output jack
(round shaped jack) on
an MD player etc.
To the optical output jack
(square shaped jack) on a
stereo etc.
Digital cable
(AD-M1DC,
available optionally)
Playback side
Recording side
To the
OPTICAL/
LINE IN
jack
Playback side
RL
OPTICAL/
LINE IN
AUDIO OUT
RIGHT LEFT
To the OPTICAL/LINE
IN jack
Playback side
Recording side
Connecting cable
included with this unit
To the line output
jacks on a stereo
■ Type of recording
Two types of recording are possible: “Digital recording” and “Analog recording”. There
are different cables and connections for each type of recording, depending on the jacks
on the equipment being connected to the unit.
8
MD-MS702
To Next Page
Loading...
