Sharp MS702 - MiniDisc Recorder

■ To eliminate the confirmation
sound
Every time a button is pressed, a “beep”
will be heard in the headphones.
To silence the “beep” sound, do the follow-
ing:
1 While in the stop mode ...
Hold down the PLAY MODE button or
the MODE/INS button until “SET UP”
appears.
● When you release the button, “BEEP
1 (BEEP ON)” will appear.
2 Press the PLAY MODE button or the
MODE/INS button.
● “BEEP 0 (BEEP OFF)” will appear,
and the confirmation sound will dis-
appear.
● To restore the confirmation sound,
select “BEEP 1 (BEEP ON)”.
3 Press the ■/:OFF button.
● The normal display will reappear.
■ To turn off the display
backlight
Whenever you press a button, the display
will light for about 4 seconds, so that you
can read it in the dark. You can turn off the
backlight.
1 While in the stop mode ...
Hold down the PLAY MODE button or
the MODE/INS button until “SET UP”
appears.
● When you release the button, “BEEP
1 (BEEP ON)” or “BEEP 0 (BEEP
OFF)” will appear.
2 Hold down the 5 or 4 button until
“EL on (EL ON)” appears.
3 Press the PLAY MODE button or the
MODE/INS button.
● “EL off (EL OFF)” will appear, and
the backlight will go out.
● To turn the backlight back on, select
“EL on (EL ON)”.
4 Press the ■/:OFF button.
● The normal display will reappear.
PLAY MODE
MODE/INS
:OFF
34
MD-MS702