Sharp MX 3070

38
Fax
THE TRANSMITTED FAX IS REDUCED BY THE
RECEIVING FAX MACHINE
Check Solution
Has the rotation sending been set? ■ Enable "Rotation Sending Setting" before transmission.
When [Rotation Sending Setting] is not enabled (the image is not rotated), an
original placed in the vertical orientation may be reduced by the receiving
machine.

"Setting mode" → [System Settings] → [Image Send Settings] → [Fax Settings]
→ [Send Setting] → [Rotation Sending Setting] →
If "Mixed Size Original" is enabled in Others and an original with a different width
is sent, rotate transmission will be disabled.
TRANSMISSION DOES NOT BEGIN AT THE
SPECIFIED TIME
Check Solution
Is the machine's clock set to the
correct time?
■ Set the clock to the correct time.
 "Setting mode"
→ [System Settings] → [Common Settings] → [Clock]
Is a transmission in progress? ■ If another transmission is in progress when the specified time arrives, the timer
operation will begin after that transmission is finished.
PRINTING DOES NOT TAKE PLACE AFTER
RECEPTION
Check Solution
Does a password entry screen
appear?
■ Enter the correct password using the numeric keys.
[Hold Setting for Received Data Print] is enabled. If you do not know the
password, check with your administrator.
 "Setting mode (administrator)"
→ [System Settings] → [Image Send Settings]
→ [Common Settings] → [Condition Settings]
→ [Hold Setting for Received Data Print]
?
!
?
!
?
!