Sharp MX-3500N - Page 152

MX3500N SIMULATION 7 – 44
* When [CLOSE] button is pressed, the display shifts to the copy
basic screen of the simulation.
* Press [COLOR]/[BLACK] key to execute copying.
<Display item and content descriptions>
27-14
Purpose
Operation test/Check
Function (Purpose)
The FSS connection test mode setting is
made.
Section
—
Item
Operation
Operation/Procedure
1) When the machine enters Simulation 27-14, following the
screen is displayed.
2) Enter the set value with 10-key.
* Press [C] key to clear the entered value.
* The FSS connection test mode setting cannot be changed
from Enable (1:ON) to Disable (0:OFF).
3) When [OK] button is pressed, and the current set value is
saved to EEPROM and RAM.
* When [COLOR], or [BLACK] key is pressed, the current set
value is saved to EEPROM and RAM.
* When [CA] key or [SYSTEM SETTINGS] key is pressed to
exit the simulation, the machine is rebooted.
<Setting range and default value of each set value>
*: The FSS connection test can be changed only from Disable to
Enable, and cannot be changed from Enable to Disable.
30
30-1
Purpose
Operation test/Check
Function (Purpose)
Used to check the operations of the sen-
sors and detectors in the paper feed sec-
tion, the paper transport section, and the
paper exit section.
Section
Paper feed
Item
Operation
Operation/Procedure
1) When the machine enters Simulation 30-01, the following
screen is displayed to show the sensor status change.
* When each sensor is turned ON, the corresponding sensor
name is highlighted.
<Sensor name>
Display item Content
Occurrence date
and time
Code between
sensors
Passing time
Passing
reference time
Main
unit
FEED TIME1 History of paper feed time between sensors 1 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME2 History of paper feed time between sensors 2 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME3 History of paper feed time between sensors 3 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME4 History of paper feed time between sensors 4 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME5 History of paper feed time between sensors 5 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME6 History of paper feed time between sensors 6 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME7 History of paper feed time between sensors 7 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME8 History of paper feed time between sensors 8 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME9 History of paper feed time between sensors 9 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME10 History of paper feed time between sensors 10 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
RSPF/
DSPF
FEED TIME1(SPF) History of SPF paper feed time between sensors 1 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME2(SPF) History of SPF paper feed time between sensors 2 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME3(SPF) History of SPF paper feed time between sensors 3 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME4(SPF) History of SPF paper feed time between sensors 4 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME5(SPF) History of SPF paper feed time between sensors 5 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME6(SPF) History of SPF paper feed time between sensors 6 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME7(SPF) History of SPF paper feed time between sensors 7 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME8(SPF) History of SPF paper feed time between sensors 8 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME9(SPF) History of SPF paper feed time between sensors 9 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
FEED TIME10(SPF) History of SPF paper feed time between sensors 10 99/99/99 99:99:99 5 digits 5 digits (ms) 5 digits (ms)
Item Display Content
Setting
range
Default
A CONNECTION
TEST MODE
(1: ON 0: OFF)
1 Set the FSS connection
test mode to Enable.
0 to 1 0
(OFF)
0 Set the FSS connection
test mode to Disable. *
SIMULATION NO.27-13
TEST
TROUBLE PRECOGNITION RESULT(FEED TIME)
CLOSE
DATE SENSOR CODE PASS TIME STANDARD TIME
FEED TIME1 : 99/99/99 99:99:99 99999 99999 99999
FEED TIME2 : 99/99/99 99:99:99 99999 99999 99999
FEED TIME3 : 99/99/99 99:99:99 99999 99999 99999
FEED TIME4 : 99/99/99 99:99:99 99999 99999 99999
FEED TIME5 : 99/99/99 99:99:99 99999 99999 99999
FEED TIME6 : 99/99/99 99:99:99 99999 99999 99999
1/4
0
Code of sensor Sensor name
PPD1 Resist front detection
PPD2 Resist detection
POD1 Fusing after detection
POD2 Paper exit detection
POD3 Right tray paper exit detection
TFD2 Main unit paper exit full detection
TFD3 Right tray paper exit full detection
HPOS Shifter home detection
DSW_R Right door open/close detection
DSW_C Cassette 1 transport cover open/close detection
0
A:
A:0
; CONNECTION TEST MODE (1:ON 0:OFF)
SIMULATION NO.27-14
FSS TEST MODE SETUP
0
[0~ 1]
OK
TEST
CLOSE