Sharp MX-3500N - Page 356

MX3500N MANUAL PAPER FEED SECTION D – 4
3) Disengage the pawl. Lift the MF tray upper and the MF tray 2,
and disconnect the connector.
4) Temperature/humidity sensor (A), manual paper feed tray pull-
out position detector 1 (B), manual paper feed tray pull-out
position detector 2 (C)
5) Manual paper feed tray paper width detector
e. Manual feed paper length detector
1) Remove the manual paper feed tray unit.
2) Remove the MF tray 2.
3) Remove the MF tray 2 lower.
4) Manual feed paper length detector
(2) Manual paper feed unit
1) Open the right door unit.
2) Remove the manual paper feed tray unit.
3) Disconnect the connector, and remove the manual paper feed
unit.
a. Paper pickup roller
b. Paper feed roller
1) Remove the MF pickup cover.
2) Remove the paper pickup roller (A) and the paper feed roller
(B).
1
3
2
A
B
C
A
B