10
BEFORE USING THE MACHINE
PART NAMES AND FUNCTIONS
(1) Job separator (upper tray)
Received faxes and printed papers are delivered to this
tray.
(2) Output tray
Output is delivered to this tray.
(3) Automatic Document Feeder
This automatically feeds and scans multiple originals.
2-sided originals can be automatically scanned.
► USING THE AUTOMATIC DOCUMENT FEEDER
(page 16)
(4) USB port (A type)
This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).
(5) Operation panel
This panel hosts the [Power] button, [Power Save]
button/indicator, error indicator, [Home Screen] key, main
power indicator, data notification indicator, and touch panel.
Use the touch panel to operate each of these functions.
► OPERATION PANEL (page 13)
(6) Exit tray unit (right tray)*
Set so that paper is output into this tray as required.
(7) Main power indicator
This lamp lights up when the machine's main power
switch is in the “ ” position.
(8) [Power] button
Use this button to turn the machine's power on and off.
(9) Paper pass unit*
Relay between the machine and the finisher or saddle
stitch finisher.
(10) Finisher/Saddle stitch finisher*
This staples paper. A punch module can also be installed
to punch holes in output paper.
(11) Tray 1
Store paper in this tray. A maximum of 550 sheets (80
g/m
2
(21 lbs.)) of paper can be loaded.
(12) Tray 2 (when a stand/550/2x550/3x550/2100 sheet
paper drawer is installed)*
Store paper in this tray. A maximum of 550 sheets (80
g/m
2
(21 lbs.)) of paper can be loaded.
(13) Tray 3 (when a stand/2x550/3x550 sheet paper
drawer is installed)*
Store paper in this tray. A maximum of 550 sheets (80
g/m
2
(21 lbs.)) of paper can be loaded.
(14) Tray 4 (when a stand/3x550 sheet paper drawer is
installed)*
Store paper in this tray. A maximum of 550 sheets (80
g/m
2
(21 lbs.)) of paper can be loaded.
(15) Tray 3 (when a stand/2100 sheet paper drawer is
installed)*
Store paper in this tray. A maximum of 1200 sheets (80
g/m
2
(21 lbs.)) of paper can be loaded.
(16) Tray 4 (when a stand/2100 sheet paper drawer is
installed)*
Store paper in this tray. A maximum of 900 sheets (80
g/m
2
(21 lbs.)) of paper can be loaded.
(17) Inner finisher*
This staples paper. A punch module can also be installed
to punch holes in output paper.
You can also perform stapling manually.
* Peripheral device. For more information, see the User's Manual.
(2) (3) (4) (5) (7) (8)(6)
(11)(10)(9) (12) (13)(14) (15) (16)
(1)
(17)
To Next Page
Loading...
