Is it possible to Tandem
MX-4111N or MX-5111N with another
MX colour device?
Tandem operation is only supported with
MX-2610/3110/3610N and MX-4111/5111N series only.
What is the recommended
resolution/dimensions when using
custom images for the HOME Screen
and Button Icons?
The maximum image size which can be uploaded to the
Home Screen is 1024 x 544.
Depending on the number of icons displayed on the
HOME screen, please use the following:-
Pattern 1: Icon Qty 4 : Size 160 x 160
Pattern 2: Icon Qty 8 : Size 160 x 160
Pattern 3: Icon Qty 8 : Size 100 x 100
Pattern 4: Icon Qty 12 : Size 100 x 100
Pattern 5: Icon Qty 12 : Size 86 x 86
Pattern 6: Icon Qty 18 : Size 86 x 86
Is it possible to print onto Banner
Paper up to 1200mm in length?
The MX4111/5111N series can support printing up to
1200mm in length from the bypass tray only however, a
special PCL6 print driver and setting change (Sim26-50,
Item F) is required.
How do you print User Account
information when User Control is
enabled?
Select Settings - User Control - Default Settings.
Scroll down and select the required option from User
Information Print menu.
Note: The Administrators password will be required.
The FAX icon is not displayed correctly
on the Home Screen, even after
adding the FAX icon via system
settings once the fax expansion kit is
installed.
After installing the MXFX11 Fax Expansion Kit, execute
Sim 66-10 to perform a memory clear.
The FAX icon will then be displayed correctly, once it’s
added to the HOME Screen via System Settings
(Operation Settings - Home Screen).
Is there a trial mode available for the
Web Browsing Kit?
Yes: Use Sim 26-71 to enable
(Restricted to 32000 pages).
Note: PDF viewer & Flash is not supported using Trial
mode.
Unable to print PDF documents when
using the web browser function (MX-
AM10)
To print PDF documents via the web browser, the PS
option (MX-PK11) must be installed.
DOCUMENT FILING / PUBLIC FOLDER
Unable to browse the NAS/Public
Folder, even though the Public
Folder/NAS settings are enabled
within the Network Settings menu.
The NBT/WINS Port (Security setting) must be enabled
to use NAS/Public storage. For security measures, this
port setting is disabled as default.
Can you use Domain User Accounts to
browse the NAS/Public Folders?
NAS/Public Folders support local accounts only
(programmed on MFP)
To Next Page
Loading...
