Sharp MX-5071 Quick Start Manual

22
BEFORE USING THE MACHINE
LOADING PAPER IN OTHER TRAYS
Bypass tray
Loading envelopes
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
1
Open the bypass tray.
When loading paper larger than A4R or 8-1/2" x 11"R, pull
out the extension guide.
Pull the extension guide all the way out.
2
Load the paper with the print side
facing down.
Insert the paper along the bypass tray guides all the way into the
bypass tray until it stops slowly. Inserting the paper with excessive
force may cause the leading edge to fold back. Inserting the paper
too loosely may cause skewed feeding or misfeeds.
The paper must not exceed the maximum number of sheets
and must not be higher than the indicator line.
3
Set the bypass tray guides correctly to
the width of the paper.
Adjust the bypass tray guides so that they slightly contact
the loaded paper.
When loading envelopes in the bypass tray, set the paper type.
►
CHANGE THE SETTING OF THE PAPER TRAY (page 25)
Place the front side
facing down.
Place the front side
facing down.
Flap
When placing C4, C5, or C6

Sharp MX-5071 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Duplex Printing	Yes
Monthly Duty Cycle	200, 000 pages
Functions	Print, Copy, Scan, Fax
Print Speed	50 ppm
Copy Speed	50 ppm (black), 50 ppm (color)
Paper Capacity	Standard: 650 sheets (550-sheet tray + 100-sheet bypass tray), Maximum: 6, 300 sheets
Connectivity	USB, Ethernet
Display	10.1-inch Touchscreen
Original Size	Max. A3
Memory	5 GB
Hard Disk Drive	500 GB
Operating System Compatibility	Windows, Mac, Linux