Sharp MX-6071 Troubleshooting

24
General Problems
I DON'T KNOW HOW TO ADJUST THE TIME THE
MACHINE ENTERS ENERGY SAVE MODE
Check Solution
Set the time the machine enters
energy save mode in the Energy Save
settings of setting mode.
■ Set the time the machine enters energy save mode in the Energy Save settings
of setting mode.
Set the time the machine enters Preheat Mode.

"Settings (administrator)" → [System Settings] → [Energy Save]
→ [Eco Setting] → [Preheat Mode Setting]
Set the time that Auto Power Shut-Off takes place

"Settings (administrator)" → [System Settings] → [Energy Save]
→ [Eco Setting] → [Auto Power Shut-Off] → [Auto Power Shut-Off Timer]
I FORGOT THE ADMINISTRATOR PASSWORD
Check Solution
Was the administrator password
changed from the factory default
setting?
■ Contact your dealer or nearest SHARP Service Department.
For the factory default administrator password, see "TO THE ADMINISTRATOR
OF THE MACHINE" in Start Guide. After changing the password, take special
care to remember it.
I DON'T KNOW WHOM TO CONTACT FOR
MAINTENANCE AND SERVICE
Check Solution
Please check the customer support
information.
■ Contact your dealer or nearest SHARP Service Department.
?
!
?
!
?
!

Sharp MX-6071 Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Size	12" x 18"
Scan Resolution	600 x 600 dpi
Print Speed	60 ppm
Paper Capacity	6, 300 sheets
Connectivity	Ethernet, USB, Wi-Fi
Functions	Print, Copy, Scan, Fax
Original Size	Up to 11" x 17"
Duplex Printing	Yes
Duplex Scanning	Yes
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac, Linux
Scan Speed	Up to 220 ipm (2-sided, black & white/color)