Sharp MX-7081

DOCUMENT FILING
59
Scan to USB memory device
1
Connect the USB memory device to
the machine.
Use a FAT32 or NTFS USB memory device with a capacity
of no more than 32 GB.
2
When a screen for selecting the action
appears, tap [Scan to External Memory
Device].
• To select detailed settings in normal mode, select the
[Perform Detail Setting] checkbox .
► BASE SCREEN OF SCANNER MODE
(page 54)
• If the machine/device save screen is open, this screen will
not appear.
3
Tap the [Color Start] key or [B/W Start]
key.
To check a preview of a document, tap the [Preview] key.
► PREVIEW SCREEN
(page 15)
4
After scanning all originals, tap the
[Read-End] key.
When you scan the original using the automatic document
feeder, this screen does not appear.
5
Check the [Sending data has been
completed.] message, and remove the
USB memory device from the machine.
Easy
Fax
Print Release Easy
Scan
Easy
Copy
Toner Quantity
M
C
Bk
Y
Operation
Guide
Enlarge
Display Mode
Settings Total Count LCD Control Job Status
10:15 AM
Print from external
memory device (USB)
Scan to External
Memory Device
Perform Detail Setting
External memory device (USB) is connected.
CA
Preview Auto Set
Original
Address External Memory Device
Detail
B/W
Start
Colour
Start
Address Book History
Global
Address Search
Scan to USB/
Local Drive
8½x11
Cancel scanning
Cancel
Scan
Address Book
Scan to USB/
Local Drive
CA
Preview Auto Set
Original
Detail
B/W
Start
Color
Start
Place next original. (Pg.No.1)
Press [Start].
When finished, press [Read-End].
Change Setting Read-End
8½x11