15
SPECIFICATIONS
* The bypass specifications are for the bypass tray on the machine. The
specifications for the bypass tray for large capacity trays are indicated in a
separate table that follows.
Basic Specifications /
Copier Specifications
Name MX-7090N/MX-8090N
Type Console
Color Full color
Copier system Laser electrostatic copier
Resolution Read (B/W): 600 x 600 dpi, 600 x 400 dpi
Read (color): 600 x 600 dpi
Write: 1200 x 1200 dpi (B/W only), 600 x 600 dpi,
equivalent to 9600 dpi × 600 dpi
Gradation Scan: equivalent to 256 levels
Print: equivalent to 256 levels
Original paper sizes
Max. 11" x 17" (A3) for sheets and bound documents
Copy sizes 13" x 19" to 5-1/2" x 8-1/2"R (A3 wide to A5R),
Transparency film, Heavy paper, Tab paper, Glossy paper,
Custom
Tray 1: 8-1/2" x 11", A4
Tray 2: 8-1/2" x 11", A4
Tray 3: 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 7-1/4 x 10-1/2"R, A3 wide, A3, B4,
A4 wide, A4, A4R, B5, B5R
Tray 4: 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 7-1/4 x 10-1/2"R, 5-1/2" x 8-1/2"R,
A3 wide, A3, B4, A4 wide, A4, A4R, B5, B5R, A5R,
Custom (5.875" to 18" x 4" to 12" (148 to 457 mm x
100 to 305 mm))
Bypass*:13" x 19", 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x
13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 7-1/4 x 10-1/2"R, 5-1/2" x 8-1/2"R,
A3 wide, A3, B4, A4 wide, A4, A4R, B5, B5R, A5R,
SRA3, SRA4, Monarch, COM-9, COM-10, DL, C4,
C5, C6, Custom (5.5" to 19.2" x 3.625" to 13" (140
to 488 mm x 90 to 330 mm))
Lost margin
Leading edge: 11/64" ± 3/64" (4 mm ± 1 mm)
Trailing edge: 3/32" to 13/64" (2 mm to 5 mm)
Leading edge / Trailing edge: total 21/64" (8 mm) or less
Left edge / Right edge: total 11/64" ± 3/32" (4 mm ± 2 mm)
Maximum print area: 12-9/16" x 50-7/8" (319 mm x 1292 mm)
Paper type Tray 1/2: Plain
Tray 3: Plain, Heavy paper (26 lbs. bond to 80 lbs.
Cover (106 g/m
2
to 220 g/m
2
))
Tray 4: Plain, Heavy paper (26 lbs. bond to 80 lbs.
Cover (106 g/m
2
to 220 g/m
2
)), Transparency
film, Label, Tab paper, Emboss
Bypass*: Plain, Heavy paper (26 lbs. bond to 110 lbs.
Cover (106 g/m
2
to 300 g/m
2
)), Transparency
film, Label, Tab paper, Emboss, Thin paper,
Envelope, Glossy paper
Paper weight:
Tray 1/2: 16 lbs. bond to 28 lbs. bond (60 g/m
2
to 105 g/m
2
)
Tray 3/4:
16 lbs. bond to 80 lbs. Cover (60 g/m
2
to 220 g/m
2
)
Bypass*:
13 lbs. bond to 110 lbs. Cover (55 g/m
2
to 300 g/m
2
)
• Some usage conditions or paper types may prevent
correct printing.
Warm-up time 90 seconds
• This may vary depending on the ambient conditions.
First-copy time MX-7090N MX-8090N
B/WColorB/WColor
Document
cover
4.0 seconds 5.6 seconds 3.7 seconds 5.1 seconds
DSPF
6.5 seconds 9.2 seconds 6.3 seconds 8.8 seconds
This may vary depending on the state of the machine.
* Portrait feeding of 8-1/2" x 11" (A4) sheets.
Continuous
copying
speeds*
(when shifter is
not in operation)
(Unit: copies/min.)
MX-7090N
(Color/B/W)
MX-8090N
(Color/B/W)
8-1/2" x 11", A4, B5 70/70 80/80
SRA4 68/68 75/75
A4W 55/55 60/60
8-1/2" x 11"R, 7-1/4" x 10-1/2"R,
5-1/2" x 8-1/2"R, A4R, B5R, A5R
46/46 50/50
8-1/2" x 14", 8-1/2" x 13", 8-1/2" x
13-2/5", 8-1/2" x 13-1/2", B4
40/40 44/44
11" x 17", A3 36/36 38/38
12" x 18", A3 wide, SRA3 34/34 36/36
13" x 19" 37/37 41/41
* Continuous speed for same original source. Output may
be temporarily interrupted to stabilize image quality.
Copy ratios Same size: 1: 1 ± 0.5 %
Enlarge (Inch size):
121 %, 129 %, 200 %, 400 %
(AB size: 115 %, 122 %, 141 %, 200 %, 400 %)
Reduce (Inch size): 25 %, 50 %, 64 %, 77 %
(
AB size:
25 %, 50 %, 70 %, 81 %, 86 %)
Zoom range: 25 to 400 % in 1 % increments, total 376
increments. Can calculate zoom rate when mm is specified.
(25 - 200 % using automatic document feeder)
Paper feed /
capacity
1200 plus 800 plus 500 plus 500 ( = 3000) sheets in 4 trays
plus 100-sheet multi-bypass tray
• Using 20 lbs. bond (80 g/m
2
) weight paper
Max. paper
feed / max.
capacity
13500 sheets in 4 trays (1200 + 800 + 500 x 2) plus large
capacity trays (5000) plus large capacity trays (5000) plus
500-sheet multi-bypass tray
• Using 20 lbs. bond (80 g/m
2
) weight paper
Continuous copy
Max. 9999 copies
Memory Standard: 6 GB HDD: 1 TB
1 GB = One billion bytes when referring to hard drive
capacity. Actual format capacity is less.
Ambient
environment
Operating environment 50 °F to 95 °F (10 °C to 35 °C)
(20 % to 85 % RH) 590 - 1,013 hPa
Standard environment 69.8 °F to 77 °F (21 °C to 25 °C)
(50 ± 10 % RH)
Required power
supply
AC 208-240V/12A, 60Hz
Power consumption
MX-7090N/MX-8090N: Max. 2.88 kW
(including options such as the desk)
Dimensions 38-43/64" (W) x 30-1/4" (D) x 60-1/4" (H)
(982 mm (W) x 768 mm (D) x 1530 mm (H))
(When the operation panel and keyboard are set to the
default position)
Weight Approx. 493.4 lbs. (224 kg)
Overall
dimensions
49-21/32" (W) x 30-1/4" (D) (1261 mm (W) x 768 mm (D))
(With multi-bypass tray extended, and the operation panel
and keyboard are set to the default position)
Automatic Document Feeder
Document
feeder types
Duplex Single Pass Feeder (DSPF)
Original paper
sizes
11" x 17" to 5-1/2" x 8-1/2" (A3 to A5)
Original paper
types
Paper weight
Thin paper 9 lbs bond to 13 lbs bond (35 g/m
2
to 49 g/m
2
)
Plain paper 13 lbs bond to 34 lbs bond (50 g/m
2
to 128 g/m
2
)
Two-sided
13 lbs index to 34 lbs bond (50 g/m
2
to 128 g/m
2
)
Paper storage
capacity
150 sheets (20 lbs. bond (80 g/m
2
))
(or maximum stack height of 50/64" (19.5 mm))
!mx8090n_us_sg.book 15 ページ ２０１７年８月９日 水曜日 午前１０時５９分
To Next Page
Loading...
