20
BEFORE USING THE MACHINE
• When loading A4 size paper in tray 1, or 8-1/2" x 14" paper in trays 2 to 4, remove divider plate A.
Move divider plate A all the way to the paper feed opening (right side), and pull up.
• If the machine does not recognize the paper size even though A4 size is correctly loaded in tray 1, or 8-1/2" x 14" size
is correctly loaded in trays 2 to 4, check if the holder in the cassette is positioned at A4 (8-1/2" x 14” in trays 2 to 4).
• When setting 8-1/2" x 11" size paper in tray 2 to 4, remove the 2 regulation plates with green color on the front and
back side of the tray before setting the paper. The plates are contained in the inside storage space of the back side of
the tray.
3
Insert the paper into the tray.
• Load the paper with the print side facing up. The stack
must not be higher than the indicator line.
• Fan the paper well before loading it. Otherwise, multiple
sheets may feed at once and cause a misfeed.
• Do not load the paper as shown below.
4
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine slowly.
Forcefully inserting the paper may cause skewed feeding
and paper misfeeds.
Storage spaceRegulation plate
To Next Page
Loading...
Need help?
General
