Sharp MX-B400P - Setting the Paper Size

28
The following example explains how to print a letter size document from
"TextEdit" ("SimpleText" in Mac OS 9), which is a standard accessory
program on Macintosh computers.
In a Macintosh environment, the PS3 expansion kit must be installed to use
the machine as a network printer.
To install the printer driver and configure settings in a Macintosh
environment, see "3 - SETUP IN A MACINTOSH ENVIRONMENT" in the
Software Setup Guide.
Setting the paper size
Select paper settings in the printer driver before selecting the print
command.
Macintosh
1
Open the page setup
window in TextEdit.
(1) Open the [File] menu.
(2) Select [Page Setup].
In Mac OS 9, select [Print] from
the [File] menu of SimpleText.
2
Select paper settings.
(1) Make sure the correct
printer is selected.
The machine name that
appears in the "Format for"
menu is normally [SCxxxxxx]. In
Mac OS X v10.6, it is normally
[RDVxxxxxx]. ("xxxxxx" is a
sequence of characters that
varies depending on your
machine model.)
(2) Select [US Letter].
(3) Click the [OK] button.
(1)
(2)
(1)
(2)
(3)
mxb400p_us_qck.book Page 28 Friday, November 6, 2009 6:24 PM