44
Changing the paper size used for a job
When the size of paper is not loaded in any
of the machine's paper trays, follow the
steps below to change the paper size.
Paper Empty
(1)
(2)
(3)
1 Check details on the job.
Press the [JOB STATUS] key on the
operation panel to display the job
status screen.
(1) Select the job whose status is
[Paper Empty].
(2) Select the [Detail] key.
To delete the job, you can select the
[Stop/Delete] key.
(3) Check the paper size specified
for the job in the detail screen,
and select the [Paper Select]
key.
mxb400p_us_qck.book Page 44 Friday, November 6, 2009 6:24 PM
To Next Page
Loading...
