Sharp MX-B400P - Printer Settings

3-47
SYSTEM SETTINGS
WEB PAGE (ADMINISTRATOR)
Printer Settings
Item Factory default setting Page
■ Printer Settings
3-55
● Default Settings 3-55
X Prohibit Notice Page Printing Enabled 3-55
X Prohibit Test Page Printing Disabled 3-55
X A4/Letter Size Auto Change Disabled 3-55
X Print Density Level 3 3-55
X Bypass Tray Settings 3-55
 Enable Detected Paper Size in Bypass Tray Disabled 3-55
 Enable Selected Paper Type in Bypass Tray Enabled 3-55
 Exclude Bypass-Tray from Auto Paper Select Disabled 3-55
X Job Spool Queuing Enabled 3-55
● Interface Settings 3-56
X Hexadecimal Dump Mode Disabled 3-56
X I/O Timeout 60 sec. 3-56
X Enable USB Port Enabled 3-56
X USB Port Emulation Switching Auto 3-56
X Enable Network Port Enabled 3-56
X Network Port Emulation Switching Auto 3-56
X Port Switching Method Switch at End of Job 3-56